Mechanical Tests - Siemens 7XV5654-0BA00 Manual

5.5

Mechanical Tests

Vibration and Shock Stress in Stationary Use
Oscillation
– IEC 60068-2-6
– IEC 60255-21-1
Shock
– IEC 60068-2-27
– IEC 60255-21-2, Class 1
Seismic vibration
– IEC 60068-3-3
– IEC 60255-21-3, Class 2
Vibration and Shock Stress during Transport and Storage
Oscillation
– IEC 60068-2-6
– IEC 60255-21-1, Class 2
Shock
– IEC 60068-2-27
– IEC 60255-21-2, Class 1
– IEC 60068-2-29
– IEC 60255-21-2, Class 1
Accessories, Sync Transceiver, Optical/Electrical Converter for Time Synchronization, Manual
C53000-G9050-C168-1, Edition 09.2019
Sinusoidal
5 Hz to 150 Hz: ±7.5 mm amplitude below 8 Hz:
Acceleration: 20 m/s 2 (2 g) above 8 Hz
3 frequency sweeps (each at 90°, 20 cycles per axis)
Semi-sinusoidal
Acceleration 5 g, duration 11 ms,
3 shocks each in both directions of the 3 axes
Sinusoidal
1 Hz to 8 Hz: +8 mm amplitude (horizontal axis)
1 Hz to 8 Hz: +4 mm amplitude (vertical axis)
8 Hz to 35 Hz: 2 g acceleration (horizontal axis)
8 Hz to 35 Hz: 1 g acceleration (vertical axis)
Frequency sweep rate: 1 octave/min; 1 cycle in 3 orthogonal axes
Sinusoidal
5 Hz to 8 Hz: ± 7.5 mm amplitude;
8 Hz to 150 Hz: 2 g acceleration
Frequency sweep rate: 1 octave/min, 20 cycles in 3 orthogonal axes.
Semi-sinusoidal
Acceleration 15 g, duration 11 ms,
3 shocks each in both directions of the 3 axes
Acceleration 10 g, duration 16 ms,
1000 shocks each in both directions of the 3 axes
Technical Data
5.5 Mechanical Tests
51