Configuring with Web Based Management
5.4 "Information" menu
5.4.11.5
Overview Client
Overview of the configuration
Note
This page is only available for clients or access points in client mode.
The page shows an overview of the existing clients and their configuration.
Description
● Radio
Shows the available WLAN interfaces in this column.
● WLAN mode
Shows the transmission standard.
● MAC Mode
Shows how the MAC address is assigned to the interface.
– Automatic
– Manual
– Own
– Layer 2 Tunnel
● MAC Address
Displays the MAC address of the WLAN interface.
● Operative Channel
Shows the channel of the access point with which the client is connected.
118
The client automatically adopts the source MAC address of the first frame that it
receives over the Ethernet interface.
The address was entered manually.
The client uses the MAC address of the Ethernet interface for the WLAN interface.
The client uses the MAC address of the Ethernet interface for the WLAN interface.
The network is also informed of the MAC addresses connected to the Ethernet
interface of the client. Up to eight MAC addresses can be used.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08