Simatic Time Client - Siemens SCALANCE W780 Configuration Manual

Configuring with Web Based Management
5.5 "System" menu
5.5.12.6

SIMATIC Time Client

Time setting via SIMATIC time client
Description
The page contains the following boxes:
● SIMATIC Time Client
Select this check box to enable the device as a SIMATIC time client.
● Current System Time
This box displays the current system time.
● Last Synchronization Time
This box is read-only and shows when the last time-of-day synchronization took place.
● Last Synchronization Mechanism
This box displays how the last time-of-day synchronization was performed. The following
methods are possible:
– Not set
– Manual
– SNTP
– NTP
– SIMATIC
Procedure
1. Click the "SIMATIC Time Client" check box to enable the SIMATIC Time Client.
2. Click the "Set Values" button.
194
The system time was not set.
Manual time setting
Automatic time-of-day synchronization with SNTP
Automatic time-of-day synchronization with NTP
Automatic time-of-day synchronization using the SIMATIC time frame
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08