Configuring with Web Based Management
5.4 "Information" menu
5.4.10
DHCP Server
This page shows whether IPv4 addresses were assigned to the devices by the DHCP
server.
Description
● IP Address
Shows the IPv4 address assigned to the device.
● Pool ID
Shows the number of the IPv4 address band.
● HW Type
Shows that the DHCP server identifies the devices in the network based on the MAC
address.
● HW Address
Shows the MAC address of the DHCP client.
● Allocation Method
Show whether the IPv4 address was assigned statically or dynamically. You configure the
static entries in "System > DHCP > Static Leases".
● Binding State
Shows the status of the assignment.
– assigned
– not assigned
– probing
– unknown
● Expire Time
Shows how long the assigned IPv4 address is still valid. Once this period has elapsed,
the device must either request a new IPv4 address or extend the lease time of the
existing IPv4 address.
110
The assignment is used.
The assignment is not used.
The assignment is being checked.
The status of the assignment is unknown.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08