Wlan Ifeatures; Iref Client List - Siemens SCALANCE W780 Configuration Manual

Configuring with Web Based Management
5.4 "Information" menu
Description
The table has the following columns:
● Interface
Shows the VAP interface to which the entries apply.
● Frame types
The other columns after the VAP interface contain the absolute numbers of the received
frames according to the frame types.
In the columns of the table, a distinction is made according to the following frame types:
– Data Frames
– Multicast/Broadcast Frames
– Unicast Frames
– Average Rate
"Reset Counter" button
Click this button to reset the counters.
5.4.13

WLAN iFeatures

5.4.13.1

iREF Client List

The WBM page shows the antenna connector via which the clients logged on to the access
point communicate. Other information such as the signal strength and the MAC address of
the WLAN interface is also shown.
Note
• This tab is available only in access point mode.
• This WBM page can only be configured with the following KEY-PLUG:
– Access point: W780 iFeatures (MLFB 6GK5 907-8PA00)
132
Number of received data frames.
Shows the number of received multicast and broadcast frames.
Shows the number of received unicast frames.
Shows average data rate of the last data frames received.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08