Static Leases - Siemens SCALANCE W780 Configuration Manual

Configuring with Web Based Management
5.5 "System" menu
5.5.10.4

Static Leases

On this page you specify that devices with a certain MAC address are assigned to the
selected IPv4 address.
Description
The page contains the following boxes:
● "Pool ID" drop-down list
Select the required IPv4 address band.
● "Hardware Type" drop-down list
Ethernet MAC
Identification is based on the MAC address. Enter the MAC address in "Value". A MAC
address consists of six byes separated by hyphens in hexadecimal notation, e.g. 00-ab-
1d-df-b4-1d.
● "Value" input box
Enter the MAC address and click the "Create" button to create the entry.
Note
A maximum of 20 entries are possible.
The table has the following columns:
● Select
Select the check box in the row to be deleted.
● Pool ID
Shows the number of the IPv4 address band.
Note
Only Pool ID = 1 is supported.
● HW Type
Shows that the IPv4 address depends on the MAC address.
172
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08