Signal Recorder - Siemens SCALANCE W780 Configuration Manual

Simatic net industrial wireless lan to ieee 802.11n web based management
Hide thumbs Also See for SCALANCE W780:
Table of Contents

Advertisement

Configuring with Web Based Management
5.6 "Interfaces" menu
5.6.2.11

Signal Recorder

Recording the signal strength
The signal recorder records the received signal strength of the connected access point.
Using this data, you can locate areas with an inadequate signal strength. The signal recorder
can be particularly useful when the client moves along a fixed path.
Note
This tab is only available in the client mode. The WLAN interface of the device must be
enabled, otherwise no recording is possible.
Description
This table contains the following columns:
● Radio
Shows the WLAN interface to which the information applies. Since a client has a WLAN
interface, there is only ever one row for "WLAN 1" in this table.
● Time interval [ms]
The time interval between acquiring two measured values in milliseconds.
● Samples
The number of measurements.
● Recorded Samples
Number of currently taken measurements or the number of measurements taken during
the last recording.
● Status
The status of the recording
– stopped
– started
240
There is currently no recording of the signal strength.
The signal strength is being recorded.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents