System Settings - Siemens SCALANCE W780 Configuration Manual

5.3.1.1

System Settings

Introduction
On this Basic Wizard page, you specify the mode of the device. After changing the mode, a
message is displayed.
If you confirm the message with "OK", the device restarts with the factory-set configuration
settings. Log on again and start the Basic Wizard to continue the configuration of the device
for the selected mode.
Note
Because only access points can work in client mode as well, the mode can only be selected
for these devices.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
Configuring with Web Based Management
5.3 "Wizard" menu
65