Dot1X Supplicant Settings - Siemens SCALANCE W780 Configuration Manual

5.3.1.11

Dot1x Supplicant Settings

Introduction
On this Basic Wizard page, you configure the user name and the password with which the
client will be logged on with the RADIUS server.
If you require additional authentication methods, you can configure them after completing the
Basic Wizard with "Security > WLAN > Client Radius Supplicant".
Note
This page is only available in client mode.
Description
Table 1 contains the following columns:
● Radio
Shows the available WLAN interfaces.
● Dot1x User Name
Enter the user name with which the client will log on with the RADIUS server.
● Dot1x User Password
Enter the password for the user name selected above. The client is logged on with the
RADIUS server using this combination.
For password assignment, ASCII code 0x20 to 0x7e is used.
● Dot1x User Password Confirmation
Enter the password again in this input box.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
Configuring with Web Based Management
5.3 "Wizard" menu
83