Setting The Network Port Connection Mode (-M) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Parameters
Parameter
devicename
portid
state
Usage Instruction
l
l
Example
# Enable the auto-negotiation mode of port 0 and make the setting take effect permanently.
[root@localhost tool]# hinicadm hilink_speed -i hinic0 -p 0 -an on -d
Set auto-negotiation succeed.
Set default configuration succeed.
Active default configuration succeed.

6.1.4.23.4 Setting the Network Port Connection Mode (-m)

Function
The hilink_speed -m command is used to set the network port connection mode.
Format
hinicadm hilink_speed -i <devicename> -p <portid> -m <mode> [-d]
Parameters
Parameter
devicename
portid
Issue 06 (2019-07-27)
Description
Indicates the name of the
IN200 to be configured in
the system.
Indicates the number of
the port to be set.
Indicates whether the
auto-negotiation mode is
enabled.
If the command contains -d, the setting is permanent and takes effect after a restart.
If the command does not contain -d, the setting is not permanent and will be restored to
the factory setting after a restart.
Description
Indicates the name of the
IN200 to be configured in
the system.
Indicates the number of
the port to be set.
Copyright © Huawei Technologies Co., Ltd.
Value
Example: hinic0 or hinic1
-
l on
l off
Value
Example: hinic0 or hinic1
-
6 Management Tools
84