Huawei IN200 User Manual page 23

Huawei IN200 NIC
User Guide
Double-click hinic_<version>_<Windows_OS>_x86_64.msi to install the driver package.
----End
If an exception occurs during the installation (for example, the server is restarted or powered
off), handle the problem by referring to
Installation or
Follow-up Procedure
After the driver is installed, you can operate the following steps.
1.
2.
3.
Issue 06 (2019-07-27)
NOTE
Select Complete for Choose Setup Type.
Uninstallation.
Run the lsmod | grep hinic command on Linux, or run the vmkload_mod -l | grep hinic
command on VMware ESXi to check whether the driver has taken effect.
– If no command output is displayed, the driver has not taken effect, and you need to
perform the operation again.
– If the command output about the IN200 driver is displayed, the driver has taken
effect.
Run the version command to query the current driver version using hinicadm tool.
In Microsoft Windows, you can scan for hardware detection changes in the Device
Manager and check whether the driver has been installed on the IN200 and whether the
driver has been identified.
Copyright © Huawei Technologies Co., Ltd.
A.1 An Exception Occurs During Driver
2 Installation and Maintenance
14