Querying And Setting The User Priority And Cge Pause Time (Qos) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide

6.1.4.13 Querying and Setting the User Priority and CGE Pause Time (qos)

Function
The qos command is used to query and set the user priority and CGE pause time of a
specified device.
Format
hinicadm qos -i <devicename>
hinicadm qos -i <devicename> -c <qoscos>
hinicadm qos -i <devicename> -t <cge pause time> -p <port id>
Parameters
Parameter
devicename
qoscos
cge pause
time
port id
Usage Instruction
None
Example
# Set the user priority of the IN200 to 6 5 3 0.
[root@localhost tool]# hinicadm qos -i hinic0 -c 6530
Set cos2up succeed.
# Query the user priority of the IN200.
Issue 06 (2019-07-27)
Description
Indicates the name of the
IN200 whose user priority is
to be queried and set in the
system.
Indicates the user priority
sequence to be configured.
Indicates the pause frame flow
control time of the CGE
module on the current chip.
Indicates the physical port
number.
Copyright © Huawei Technologies Co., Ltd.
Value
Example: hinic0 and hinic1
l The value range of each element in the
sequence is 0 to 7.
l The sequence must be in descending
mode.
l The number of elements contained in
the sequence must be the same as the
number of supported classes of service
(CoSs) (the number of CoSs can be
obtained by running the query
command).
-
Example: 0
6 Management Tools
72