Setting Dwrr Scheduling (-T -P) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Parameter
tc
Usage Instruction
l
l
Example
# Set the priority-2 and priority-3 ETS of enp6s0 to SP scheduling.
[root@localhost ~]# hinicadm ets -i enp6s0 -e 1 -t 00120000
Set enp6s0 ets succeed

6.1.4.47.3 Setting DWRR Scheduling (-t -p)

Function
The ets -t -p -s command is used to set Deficit Weighted Round Robin (DWRR) scheduling
of a device.
Format
hinicadm ets -i <devicename> -e <mode> [-t <tc>] -p <percent>
hinicadm ets -i <devicename> [-t <tc>] -p <percent>
Parameters
Parameter
devicename
mode
tc
Issue 06 (2019-07-27)
After ETS is enabled for the first time after you run the -e command, you can run the -t
command to control the scheduling relationship before traffic reaches the TC.
After the ETS function is disabled, the ETS function cannot be configured and the
scheduling relationship before the traffic reaches the TC does not change. ETS needs to
be manually reconfigured.
Copyright © Huawei Technologies Co., Ltd.
Description
Controls the scheduling
relationship before the traffic
reaches the Traffic Classifier
(TC).
Description
Indicates the name of the
IN200 to be queried and set in
the system.
Enables or disables the ETS
function.
Controls the scheduling
relationship before the traffic
reaches the TC.
6 Management Tools
Value
xxxxxxxx
The x value ranges from 0
to 3.
Value
For example, the value can
be enp6s0 or enp7s0.
l 1: enables ETS.
l 0: disables ETS.
xxxxxxxx
The x value ranges from 0
to 3.
113