Activating Firmware (-A) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Parameters
Parameter
devicename
fwfile
activemode
activetype
Usage Instruction
None
Example
# Upgrade abd activate the IN200 firmware.
[root@localhost tool]#hinicadm updatefw -i hinic0 -f ./Hi1822_nic_std_4_25G.bin -
a now
Please do not remove driver or network device.
Loading...
Firmware update start: 2018-07-14 22:54:47
[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] [100%][\]
Firmware update finish: 2018-07-14 22:55:07
Firmware update time uesd: 20s
Do not operate the device during the hot upgrade.
Firmware is activing. Please waiting......

6.1.4.4.4 Activating Firmware (-a)

Function
The updatefw -a command is used to activate hot-upgraded firmware that has not been
activated.
Issue 06 (2019-07-27)
Description
Indicates the name
of the IN200 to be
upgraded in the
system.
Indicates the path to
the firmware
upgrade package.
Indicates the
activation mode.
Indicates the
activation type.
Copyright © Huawei Technologies Co., Ltd.
Value
Example: hinic0 and hinic1
Format: Path/Upgrade package name
l now: activates the firmware immediately.
l later: activates the firmware later.
NOTE
l If the command does not contain -a, it implements
6.1.4.4.1 Cold-Upgrading All Firmware
l If the frimware is not activated immediately, you
need to set activemode to now and run the
command again to activate the firmware later.
l up: activates the uP firmware.
l ucode: activates the microcode firmware.
NOTE
If the command does not contain -t, all firmware is
activated.
6 Management Tools
(-f).
60