Huawei IN200 User Manual page 59

Huawei IN200 NIC
User Guide
Major Command
autoneg
nic_queue
mode
hilink_param
fe_epc
hilink_dump
hilink_port
hilink_count
hilink_speed
bp
dp
cpb
tile_io
csr_rd
csr_wr
csr_dump
pdm
Issue 06 (2019-07-27)
Function
Queries and sets the auto
negotiation mode.
Queries the rx/tx queue
information of a device.
Queries and sets the device work
mode.
Queries the ctle, ffe, and dfe
parameters.
Obtains Fusion Engine (FE) error
information.
Queries information about the
hilink register.
Queries port information.
Queries hilink statistics
information.
Queries and sets the rate of a port.
Queries chip back pressure
information.
Queries statistics on chip data path
modules.
Queries the usage of chip CPB
cells.
Queries the status of microcode
threads.
Reads the chip register.
Writes the chip register.
Reads and saves chip register
values in batches.
Queries the CPB CELL resource
allocation and current resource
usage.
Copyright © Huawei Technologies Co., Ltd.
6 Management Tools
Remarks
-
-
-
-
-
-
-
-
-
The ARM versions of the
following OSs are not
supported:
l SLES 15/12.3/12.4
l RHEL 7.4/7.5/7.6
l CentOS 7.4/7.5/7.6
l EulerOS V2.0 SP8
ARM
l NeoKylin Server
V5.0U5/V7.0U5/
V7.0U6
NOTE
l These commands are
used only by
developers for
troubleshooting and do
not affect your use of
the hinicadm tool.
l These commands can
be used only after the
iommu (for an x86
version) or Smmu (for
an ARM version)
parameter is enabled in
the SR-IOV pass-
through mode. For
details, see 3
Configuring SR-IOV.
50