Clearing Existing Configurations (-P -C) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Parameters
Parameter
devicename
portid
fecmode
Usage Instruction
l
l
l
Example
# Set the FEC mode of port 0 of the IN200 to rsfec and use persistent configurations.
[root@localhost tool]# hinicadm nic_fec -i hinic0 -p 0 -m rsfec -d
Set default FEC mode succeed.
Active default configuration succeed.

6.1.4.8.3 Clearing Existing Configurations (-p -c)

Function
The fec -p -c command is used to clear the existing configurations and restore the default
configurations of the FEC, auto-negotiation, and forced rate.
Format
hinicadm fec -i <devicename> -p <portid> -c
Issue 06 (2019-07-27)
If the command contains -d, the setting is permanent and takes effect after a restart.
If the command does not contain -d, the setting is not permanent and will be restored to
the factory setting after a restart.
The FEC mode takes effect only when the current optical module supports the FEC
mode or an optical module that supports the FEC mode is install; otherwise, the original
mode is used.
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates the name of the
IN200 whose FEC mode is to
be set or queried in the system.
Indicates the number of the
port to be set or queried.
Indicates the FEC mode.
6 Management Tools
Value
Example: hinic0 and
hinic1
-
l rsfec: Reed Solomon
Forward Error
Correction (RSFEC)
l basefe: basic FEC mode
l nofec: non-FEC
67