Querying And Setting The Interrupt Coalescence Parameters (Inter_Coal) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide

6.1.4.40 Querying and Setting the Interrupt Coalescence Parameters (inter_coal)

Function
The inter_coal command is used to query or set the interrupt coalescence parameters.
Format
hinicadm inter_coal-i<devicename>
hinicadm inter_coal-i<devicename> [-c <coal_timer>] [-p <pend_limit>] [-rl <rate_low>] [-
ul <usecs_low>] [-pl <pend_low>] [-rh <rate_high>] [-uh <usecs_high>] [-ph <pend_high>]
Parameters
Parameter
devicename
coal_timer
pend_limit
rate_low
usecs_low
pend_low
rate_high
usecs_high
pend_high
Usage Instruction
None
Issue 06 (2019-07-27)
tx_unicast_pkts_vport: 0
tx_unicast_bytes_vport: 0
tx_broadcast_pkts_vport: 0
tx_broadcast_bytes_vport: 0
rx_multicast_pkts_vport: 0
rx_multicast_bytes_vport: 0
rx_broadcast_pkts_vport: 0
.........
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates the name of the
IN200 to be queried in the
system.
Indicates the coalescence time.
Indicates the number of
coalescence packets.
Indicates the lower threshold of
the packet rate.
Indicates the lower threshold of
the receive time.
Indicates the lower coalescence
threshold.
Indicates the upper threshold of
the packet rate.
Indicates the upper threshold of
the receive time.
Indicates the upper coalesce
threshold.
6 Management Tools
Value
Example: hinic0 or hinic1
-
-
-
-
-
-
-
-
100