ABB i-bus EIB Product Manual page 42

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Option: Master (send hourly)
Fig. 42: Parameter window: "General, Operating mode of clock, Master (send hourly)"
The internal clock sends telegrams with the time and date once per hour e.g.
to synchronise other EIB devices. You are requested to enter a time (minute)
for sending. The time and date can be queried via communication object no.
250 "Request object".
If a group address has been assigned to the parameter Group address for
request, the current time and date can be requested from a master clock at
any time.
If the internal clock is programmed as a master, it sends telegrams with the
new time and date on the bus, once the time has been set with the help of
the application program.
The time switch program is updated by adjusting the clock.
Switching operations can be triggered as a result.
A further parameter appears in the selection Master (send hourly).
Send at
Options: Minute
Hour
The minute for each full hour is entered with this parameter. The displays for
minutes can be edited via the buttons Left arrow and Right arrow.
00...59
not active
42