ABB i-bus EIB Product Manual page 102

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
The parameter window Daylight saving time is activated in the following way:
- by double-clicking on *** new daylight saving time *** or
- by pressing the right mouse button and selecting New daylight saving time
in the pop-up menu or
- by selecting Edit in the menu bar and then activating New daylight saving
time in the pop-up menu.
Fig. 109: Parameter window: "Insert daylight saving time"
Calculate
If the Calculate button is pressed, the daylight saving times can be
calculated automatically and in sequence. The calculated daylight saving
times appear under Start and End. The calculated daylight saving times can
be adopted with the help of the Insert button.
The prerequisite for the automatic calculation is the activation of the
Automatically calculate parameter.
Note: The start and end of the daylight saving time are calculated
according to the conversion rules stored in your operating
system for converting standard time to daylight saving time.
102