Table of Contents
Advertisement
®
ABB i-bus
EIB / KNX
3.2
Parameterisation software
(PZM 2.0)
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
The parameterisation software "PZM 2.0" is used by the system operator
and offers the following options:
- loading the installation configuration which has been created in ETS into
the ABZ/S 2.1.
- modifying the time switch program and then downloading the program to
the ABZ/S 2.1
- saving of the modified time switch program
- reading out and setting the time and date of the ABZ/S 2.1
- reading out the status information of the ABZ/S 2.1.
Note:
The parameterisation software PZM 2.0 has its own manual
which can be downloaded from the Internet.
13
Advertisement
Table of Contents
