Table of Contents
Advertisement
®
ABB i-bus
EIB / KNX
3.4.9.3
Modify group
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Fig. 150:
Dialog window: "Modify group"
To modify a group, select Groups in the selection area followed by e.g. 01:
Beginning of instruction.
The associated parameter window is activated in the right-hand button as
well as the Change button.
"Change" button
The Group parameter window becomes visible by pressing the Modify
button. The settings can be modified there.
157
Advertisement
Table of Contents
