ABB i-bus EIB Product Manual page 181

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Select an existing trigger e.g. the group address 00/00/002. The dialog
window for the selected Trigger for group 01: Beginning of instruction is
activated in the following way:
- by double-clicking on the selected trigger or
- by pressing the right mouse button and selecting Edit in the pop-up menu.
Fig. 170: Parameter window: "Edit group trigger"
The selected trigger dialog is now available for editing.
Group address
Options: existing group addresses /
new group address
An existing group address can be assigned in the selection list.
The parameter is divided into Type, Name and No. The table can be
arranged and sorted as required.
The meaning of the individual columns is as follows:
Type
The type indicates which type of values a telegram with this group address
can send.
Name
The name of the group address is defined when configuring the ABB i-bus
installation and cannot be modified with the parameterisation software
PZM2.
No.
The number of the group address is the unique identifier of a group address.
®
181