®
ABB i-bus
EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Initial value
Under Initial value, you define the value which the Application Unit Time
should use as a preset value after a cold start. The field is dependent on the
preset type e.g. if a 1-bit type has been selected, only the values 0 and 1
can be set.
"Insert" button
A new group is inserted via the Insert button.
"Close" button
The parameter window is closed via the Close button.
"Help" button
The "Help" file can be opened directly via the "Help" button and a further
parameter window Help for application program... is opened.
139