Siemens SINUMERIK 840D sl Commissioning Manual page 92

8 Tool Management
8.3 Start–up in NCK
8-92
$TC_MPP1[MagazineNo, LocNo]= Type of location:
S
1 = Magazine location
S
2 = Tool holder
S
3 = Gripper
S
4 = Loader
S
5 = Transfer location
S
6 = Loading station
S
7 = Loading point
Default: value of corresponding location type
$TC_MPP2[MagazineNo, LocNo]= Type of location:
Any values can be entered here. The values must match the tools to be loaded
at the location.
Example:
S
Value = 0: Every tool fits in this location
S
Value = 1: Location for heavy tools
S
Value = 2: Location for long tools
$TC_MPP3[MagazineNo, LocNo]= Considering adjacent location ON = 1
S
Value = 1: An adjacent location is considered for the location specified
S
Value = 0: No adjacent location is considered for the location specified
S
Value = 0: This must be entered for buffer and load locations.
$TC_MPP4[MagazineNo, LocNo]= Location status:
S
Bit 0 = 1: Blocked
S
Bit 1 = 1: Free/allocated
Default: Bit 1 set
$TC_MPP5[MagazineNo, LocNo]= Location type index
For $TC_MPP1[Magazine no., Location no.]=1 (location type is the magazine
location), the location number is entered here. For other location types, the type
index is incremented.
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
© Siemens AG 2006 All Rights Reserved
11/2006