Siemens SINUMERIK 840D sl Commissioning Manual page 91

11/2006
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
$TC_MAP3[MagazineNo]= Magazine status
S
Bit 0 = 1: Active magazine
S
Bit 1 = 1: Blocked
S
Bit 2 = 1: Magazine is at load position
S
Bit 3 = 1: Tool motion is active
S
Bit 4 = 1: Enabled for loading
Default: Bit 0 and bit 4 set
$TC_MAP6= Number of magazines
for ShopTurn: 1
$TC_MAP7= Number of locations
e.g. number of buffer locations 1= tool holder
$TC_MAMP2= Type of search strategy
This mask is divided into a right and left byte.
S
The right byte describes the tool search (bits 0 and 1).
S
The left byte describes the empty location search for the active tool.
A value must be specified for both strategies.
S
Bit 0 = 1: Search for active tool with tool designation (1)
S
Bit 1 = 1: Search for next tool with tool designation (2)
S
Bit 8 = 1: Search from 1st location onwards (256)
S
Bit 9 = 1: Search from current location onwards (512)
S
Bit 10 = 1: Search from last location backwards (1024)
S
Bit 11 = 1: Search from current location backwards (2048)
S
Bit 12 = 1: Search from current location symmetrically (4096)
Example: $TC_MAMP2=257 (bit 0=1 and bit 8=1)
Bit 0 = 1: Search for active tool with tool designation,
Bit 8 = 1 Search from 1st location onwards
8 Tool Management
8.3 Start–up in NCK
8-91