Siemens SINUMERIK 840D sl Commissioning Manual page 70

7 Machine Data
7.2 Display machine data for ShopTurn
9840
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9841
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9842
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9843
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: WORD
Significance:
9849
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: DOUBLE
Significance:
7-70
$MM_ST_ENABLE_MAGN_GLASS
Magnifying glass function in manual: Measure tool
Min. input limit: 0
Protection level: 3/4
This MD can be used to activate the "Measure tool with zoom–in" function.
0 = Function not available
1 = Function available
$MM_ST_ENABLE_P ART_OFF_RECEPT
Enable receptacle function for cut–off
Min. input limit: 0
Protection level: 3/4
This MD can be used, if you have implemented the "Receptacle for cut–off" function via
machine manufacturer cycle ST_CUST.SPF, to activate the "Part gripper" parameter in the
"Part cut–off" mask.
0 = "Part gripper" parameter is not displayed.
1 = "Part gripper" parameter is displayed.
$MM_ST_ENABLE_T AILSTOCK
Enable tail stock
Min. input limit: 0
Protection level: 3/4
This MD is used to activate the "tail stock" parameter in the program header mask.
0 = "Tail stock" parameter is not displayed
1 = "Tail stock" parameter is displayed
$MM_ST_ENABLE_SPINDLE_CLAMPING
Enable spindle clamping (C axis)
Min. input limit: 0
Protection level: 3/4
This MD can be used, if you have implemented the "Clamp/unclamp spindle" function via
machine manufacturer cycle ST_CUST.SPF, to activate the "Clamp/unclamp spindle" para-
meter in the drilling and milling masks.
0 = "Clamp/unclamp spindle" parameter is not displayed in the drilling and milling masks.
ShopTurn automatically clamps the spindle when machining if clamping is useful for the
current application.
1 = "Clamp/unclamp spindle" parameter is displayed in the drilling and milling masks. The
operator decides for which machining the spindle should be clamped.
$MM_ST_CYCLE_SUB_SP_P ARK_POS_Y
Parking position of Y axis with counterspindle
Min. input limit: –
Protection level: 3/4
This MD is used to specify the Y position in the MCS when approaching the parking posi-
tion for the counterspindle cycle.
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
Max. input limit: 1
Units: –
Valid as of software version
ShopTurn 6.1
Max. input limit: 1
Units: –
Valid as of software version
ShopTurn 6.1
Max. input limit: 1
Units: –
Valid as of software version
ShopTurn 6.1
Max. input limit: 1
Units: –
Valid as of software version
ShopTurn 6.4
Max. input limit: –
Units: mm
Valid as of software version
ShopTurn 7.2
© Siemens AG 2006 All Rights Reserved
11/2006