Siemens SINUMERIK 840D sl Commissioning Manual page 90

8 Tool Management
8.3 Start–up in NCK
Variable
description
8-90
$TC_MPP1[1,12]=1
$TC_MPP2[1,12]=1
$TC_MPP3[1,12]=1
$TC_MPP4[1,12]=2
$TC_MPP5[1,12]=12
;
;locations of buffer magazine
;––––––––––––––––––––––––––
;spindle
$TC_MPP1[9998,1]=2
$TC_MPP2[9998,1]=0
$TC_MPP3[9998,1]=0
$TC_MPP4[9998,1]=2
$TC_MPP5[9998,1]=1
;locations of load magazine
;––––––––––––––––––––––––––
;1st load point
$TC_MPP1[9999,1]=7
$TC_MPP2[9999,1]=0
$TC_MPP3[9999,1]=0
$TC_MPP4[9999,1]=2
$TC_MPP5[9999,1]=1
;distance to change position of real magazine
;––––––––––––––––––––––––––––––––––––––––––––
$TC_MDP2[1,1]=0
$TC_MDP1[1,1]=0
$TC_MDP1[1,2]=0
M17
The main variables for the configuration file are described here. For a detailed
description of the system variables, please refer to:
References: /FBW/, Description of Tool Management Functions
$TC_MAP1[MagazineNo]= Magazine type
S
1: Chain
S
3: Revolver
S
5: Flat magazine
S
7: Internal magazine tool buffer
S
9: Internal magazine loading station
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
;location kind (2: spindle)
;location type
;consider adjacent
;location state (2: location free)
;location kind index (1: spindle)
;location kind (7: load point)
;location type
;consider adjacent
;location status (2: location free)
;location kind index (1: loadpoint 1)
;spindle
;1st load point
;2nd load point
© Siemens AG 2006 All Rights Reserved
11/2006