Siemens SINUMERIK 840D sl Commissioning Manual page 69

11/2006
9832
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: DOUBLE
Significance:
9833
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: DOUBLE
Significance:
9836
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: DOUBLE
Significance:
9837
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: DOUBLE
Significance:
9838
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: DOUBLE
Significance:
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
$MM_ST_SPINDLE_P ARA_ZL2
Stop dimension for counter–spindle
Min. input limit: –
Protection level: 3/4
This MD is used to stipulate the stop dimension ZL2 of the counter–spindle. You need the
stop dimensions for determining the reference point when moving the counter–spindle (see
MD 9829 $MM_ST_SPINDLE_CHUCK_TYPES).
Or, alternatively, you can make these settings in the "Tools zero offset" menu → ">" →
"Spindles" in parameter "ZL2". Changes to the MD are automatically transferred to the pa-
rameter and vice versa.
$MM_ST_SPINDLE_P ARA_ZL3
Jaw dimension for counter–spindle
Min. input limit: –
Protection level: 3/4
This MD is used to stipulate the jaw dimension ZL3 of the counter–spindle. You need the
jaw dimensions for determining the reference point when moving the counter–spindle (see
MD 9829 $MM_ST_SPINDLE_CHUCK_TYPES).
Or, alternatively, you can make these settings in the "Tools zero offset" menu → ">" →
"Spindles" in parameter "ZL3". Changes to the MD are automatically transferred to the pa-
rameter and vice versa.
$MM_ST_TAILSTOCK_DIAM
Tailstock diameter
Min. input limit: –
Protection level: 3/4
This MD is used to stipulate the diameter of the tail stock. The tail stock diameter is needed
for the purposes of displaying the tail stock in simulation.
$MM_ST_TAILSTOCK_LENGTH
Tailstock length
Min. input limit: –
Protection level: 3/4
This MD is used to stipulate the length of the tail stock. The tail stock length is needed for
the purposes of displaying the tail stock in simulation.
$MM_ST_BORDER_TOOL_LEN_X_REV_2
Limit value of tool length X for the 2nd tool carrier
Min. input limit: –
Protection level: 3/4
This MD is used to specify the limit value of tool length X for the 2nd tool carrier.
MD 9838 = 0; Only one tool carrier is available
X < MD 9838; Tool belongs to tool carrier 1
X ≥ MD 9838; Tool belongs to tool carrier 2
7.2 Display machine data for ShopTurn
Max. input limit: –
Valid as of software version
ShopTurn 6.4
Max. input limit: –
Valid as of software version
ShopTurn 6.4
Max. input limit: –
Valid as of software version
ShopTurn 7.1
Max. input limit: –
Valid as of software version
ShopTurn 7.1
Max. input limit: –
Valid as of software version
ShopTurn 7.1
7 Machine Data
Units: mm
Units: mm
Units: mm
Units: mm
Units: mm
7-69