Siemens SINUMERIK 840D sl Commissioning Manual page 61

11/2006
9673
MD number
Standard value: 1
Change becomes effective after: POWER ON
Data type: BYTE
Significance:
9674
MD number
Standard value: 1
Change becomes effective after: POWER ON
Data type: BYTE
Significance:
9675
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9676
MD number
Standard value: –
Change becomes effective after: POWER ON
Data type: STRING (80 characters)
Significance:
9677
MD number
Standard value: –
Change becomes effective after: POWER ON
Data type: STRING (80 characters)
Significance:
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
$MM_CMM_TOOL_LOAD_STATION
Number of loading point
Min. input limit: 1
Protection level: 3/4
This MD is used to stipulate the loading point at which the magazine and the spindle are
loaded and unloaded. (The magazine and the spindle are always loaded/unloaded at the
same loading point.)
1 = Loading point 1
2 = Loading point 2
$MM_CMM_ENABLE_T OOL_MAGAZINE
Display of magazine list
Min. input limit: 0
Protection level: 3/4
0 = Magazine list is not displayed
1 = Magazine list is displayed
$MM_CMM_CUSTOMER_START_PICTURE
Customized boot screen
Min. input limit: 0
Protection level: 3/4
The customized boot screen is activated as follows:
0 = Siemens boot screen
1 = Customized boot screen
$MM_CMM_DIRECT ORY_SOFTKEY_PATH1
Path for drive names in directory management
Min. input limit: –
Protection level: 3/4
This MD is used to stipulate the path for the drive name of the 2nd softkey (horizontal bar)
in directory management with hard disk network link. If a blank string is entered in the dis-
play machine data this softkey is not displayed.
$MM_CMM_DIRECT ORY_SOFTKEY_PATH2
Path for drive names in directory management
Min. input limit: –
Protection level: 3/4
This MD is used to stipulate the path for the drive name of the 3rd softkey (horizontal bar) in
directory management with hard disk network link. If a blank string is entered in the display
machine data this softkey is not displayed.
7.2 Display machine data for ShopTurn
Max. input limit: 2
Valid as of software version
ShopTurn 6.1
Max. input limit: 1
Valid as of software version
ShopTurn 6.1
Max. input limit: 1
Valid as of software version
ShopTurn 6.1
Max. input limit: –
Valid as of software version
ShopTurn 6.1
Max. input limit: –
Valid as of software version
ShopTurn 6.1
7 Machine Data
Units: –
Units: –
Units: –
Units: –
Units: –
7-61