Panasonic LP-400 Series External Control Manual page 90

⿎ Counter condition : CNT
Sets the counter conditions.
• Setting / Readout data of counter condition
Sub
STX CNT
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of counter condition
STX CNT R
Name Data length [byte]
Counter No.
Current value
Initial value
End value
Step
Count source
Flag reset
Reference
• When marking on the flying object is valid, counter reset at re-dating timing cannot be used.
90
[Counter No.] [Current value] [Initial value] [End value]
[Step] [Count source] [Flag reset]
[Counter No.]
1-byte
Description
1 "0"–"7"
6 "000000"–"999999"
6 "000000"–"999999"
6 "000000"–"999999"
6 "000000"–"999999"
"0": Counter 0
"1": Counter 1
"2": Counter 2
"3": Counter 3
1 "4": Counter 4
"5": Counter 5
"6": Counter 6
"7": Counter 7
"8": Trigger input
"0": reset OFF at re-dating
1
"1": reset ON at re-dating
ME-LP400V-EX-6
27-byte
(Check
Delimiter
sum)
"4"–"7": common counter
No minus number.
When the marking on the flying object is
valid, set "0".
(Check
Delimiter
sum)
Remarks