Panasonic LP-400 Series External Control Manual page 102

6. For GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional
(Including when these codes are 1D part of the composite code.)
Data length : 54-byte (LP-V series), 51-byte (LP-400/LP-W series)
Name
Bar code No.
Area No.
Code type
Human readable
text
Inversion
Lower bar height
(GS1 DataBar
Stacked)
One bar code
height
(GS1 DataBar
Stacked
Omnidirectional)
Separator height/
(W)
Module width
X position
Y position
Tilt angle
Laser power
correction
Scan speed
correction
(Laser pulse cycle
correction)
(Only for LP-V
series)
* For the detail of the model type, refer to "Target laser marker" (P.8).
102
Data
length
[byte]
1 "0"–"7"
1 "0"–"9", "A"–"F"
"31": GS1 DataBar Stacked
"32": GS1 DataBar Stacked Omnidirectional
"41": GS1 DataBar Stacked CC-A
"42": GS1 DataBar Stacked Omnidirectional
2
CC-A
"51": GS1 DataBar Stacked CC-B
"52": GS1 DataBar Stacked Omnidirectional
CC-B
"0": Invalid
1
"2": Valid
"0": Do not invert
1 "1": Invert
"2": Invert with guard pattern
Model type*
LP-V10
7 LP-4x0
LP-4x5/LP-V15
LP-4x1/LP-W
4 "00.0"–"10.0"
5 "0.050"–"1.000" [mm]
Model type*
8
LP-V10
LP-4x0
LP-4x5/LP-V15
8
LP-4x1/LP-W
7 "-180.00"–"+180.00" [°]
3 "000"–"200" [%]
3 "005"–"500" [%]
(3) "050"–"200" [%]
Description
Setting range [mm]
"001.000"–"090.000"
"001.000"–"110.000"
"001.000"–"160.000"
"001.000"–"055.000"
Setting range [mm]
"-045.000"–"+045.000"
"-055.000"–"+055.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
ME-LP400V-EX-6
Remarks
Specifies which area part is the
marking position of the concatenated
marking on the flying object.
In case of marking static object,
specify "0".
Ratio of separation pattern height to
width in laser setting screen.
Set the larger value than "Line width".
Specifies the center coordinate of the
code.
• The correction ratio is calculated
using the value set at the laser
setting as 100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse
Cycle Correction.