Panasonic LP-400 Series External Control Manual page 114

⿎ Processing element : FIG
Sets the processing element type (straight line, circle, arc) and coordinates.
• Setting / Readout data of processing element
Sub
STX FIG
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of processing element
STX FIG R
1. For straight line: (Data length: Max. 51-byte)
Data length
Name
[byte]
Processing
condition No.
Processing
element No.
Element type
X coordinate of
start point
Y coordinate of
start point
X coordinate of
end point
Y coordinate of
end point
Dashed line:
Length of solid
part
Dashed line:
Length of blank
part
For deletion of the processing element, set the element type to straight line, and set X and Y coordinates of both start and
end points to "0".
* For the detail of the model type, refer to "Target laser marker" (P.8).
114
[Processing condition No.] [Processing element No.]
[Element type] [depending on the element type]
[Processing condition No.] [Processing element No.]
1 "0"-"7"
3 "000"-"031"
1 "0": straight line
8
Model type*
8
LP-V10
LP-4x0
LP-4x5/LP-V15
8
LP-4x1/LP-W
8
Model type*
LP-V10
(7) LP-4x0
LP-4x5/LP-V15
LP-4x1/LP-W
Model type*
LP-V10
(7) LP-4x0
LP-4x5/LP-V15
LP-4x1/LP-W
Max. 60-byte
4-byte
Description
Setting range [mm]
"-045.000"-"+045.000"
"-055.000"-"+055.000"
"-080.000"-"+080.000"
"-027.500"-"+027.500"
Setting range [mm]
"000.010"-"090.000"
"000.010"-"110.000"
"000.010"-"160.000"
"000.010"-"055.000"
Setting range [mm]
"000.000"-"090.000"
"000.000"-"110.000"
"000.000"-"160.000"
"000.000"-"055.000"
ME-LP400V-EX-6
(Check
Delimiter
sum)
(Check
Delimiter
sum)
Remarks
Set the larger value than "Line width" in
laser setting screen.
To make it not dashed line (solid line),
input nothing.
To make it not dashed line (solid line),
input nothing.