Panasonic LP-400 Series External Control Manual page 100

4. For CODE128, EAN/UPC
Data length : 63-byte (LP-V series), 60-byte (LP-400/LP-W series)
Name length
[byte]
Bar code No.
Area No.
Code type
Inversion
System
reservation
Bar code height
Narrow element
X position
Y position
Tilt angle
Quiet /
narrow element W
Double width /
narrow element
Triple width /
narrow element
Quadruple width /
narrow element
Laser power
correction
Scan speed
correction
(Laser pulse cycle
correction)
(Only for LP-V
series)
* For the detail of the model type, refer to "Target laser marker" (P.8).
100
Data
Description
1 "0"–"7"
1 "0"–"9", "A"–"F"
"02": CODE128
"04": EAN/UPC
2
"08": EAN/UPC with human readable text
"09": CODE128 with human readable text
"0": Do not invert
1
"1": Invert
1 "0" or "1"
Model type*
LP-V10
7 LP-4x0
LP-4x5/LP-V15
LP-4x1/LP-W
5 "0.050"–"1.000" [mm]
Model type*
8
LP-V10
LP-4x0
LP-4x5/LP-V15
8
LP-4x1/LP-W
7 "-180.00"–"+180.00" [°]
4 "00.0"–"20.0"
3 "1.4"–"2.6"
3 "2.1"–"3.9"
3 "2.8"–"5.2"
3 "000"–"200" [%]
3 "005"–"500" [%]
(3) "050"–"200" [%]
Setting range [mm]
"001.000"–"090.000"
"001.000"–"110.000"
"001.000"–"160.000"
"001.000"–"055.000"
Setting range [mm]
"-045.000"–"+045.000"
"-055.000"–"+055.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
ME-LP400V-EX-6
Remarks
Specifies which area part is the marking
position of the concatenated marking
on the flying object.
In case of marking static object, specify
"0".
This value does not affect the settings.
The response data for readout is always
"1".
Indicates the width of narrow element of
bar and space. Set the larger value than
"Line width" in laser setting screen.
Specifies the center coordinate of the
code.
Ratio of quiet width to narrow element
width.
Ratio of double width to narrow element
width.
Ratio of triple width to narrow element
width.
Ratio of quadruple width to narrow
element.
• The correction ratio is calculated
using the value set at the laser
setting as 100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse Cycle
Correction.