Communication Command List - Panasonic LP-400 Series External Control Manual

3-6 Communication Command List

Category Name
Command reception
permission
Laser pumping
Shutter
Status request
Marking status sending
permission
Marking trigger
Guide laser control
File change (No. specified)
File change (Comment
specified)
File overwriting registration
File registration
File name
Marking character string
(ASCII code specified)
Marking character string
(Shift-JIS code specified)
Serial data input
Rank condition
Rank character string
74
Code Function
MKM Controls the reception permission (reception mode
ON/OFF) for setting and readout of communication
commands.
LSR Controls the laser pumping ON/OFF.
SHT Controls the internal shutter opening/closing.
STS Requires the operation status of laser marker, such as
ready status and error occurrence status.
MST Enables automatic response of marking result (e.g.
normal end, and error occurrence, etc.) at the end of
marking.
MRK Inputs marking trigger (laser radiation startup trigger).
GID Controls radiation of red guide laser for marking
position confirmation.
FNO Specifies the file No. to change the file.
FNN Specifies the file name (comment) to change the file.
FOR Overwrite and register the file under editing.
FRG Register the file under editing to the specified No.
FNM Sets name (comment) of file under editing.
MCS Sets the marking character string by ASCII code.
(For alphanumeric and symbols only)
STR Sets the marking character string by shift-JIS code.
(For characters including KANA, KANJI and function
characters)
SIN Sets the character string specified for "Serial Data
Function" to change characters for each marking.
RKC Sets input conditions of "Rank Function" to switch
characters using I/O input.
RKS Sets character string used for "Rank Function" to
switch characters using I/O input.
ME-LP400V-EX-6
Page
P.78
P.79
P.79
P.80
P.81
P.82
P.82
P.83
P.83
P.83
P.84
P.84
P.85
P.85
P.87
P.89
P.89