Panasonic LP-400 Series External Control Manual page 103

7. For GS1 DataBar Expanded Stacked
(Including when this code is 1D part of the composite code.)
Data length : 56-byte (LP-V series), 53-byte (LP-400/LP-W series)
Name length
[byte]
Bar code No.
Area No.
Code type
Human readable text
Inversion
One bar code height
Separator height/(W)
Symbol char. in row
Module width
X position
Y position
Tilt angle
Laser power
correction
Scan speed
correction
(Laser pulse cycle
correction)
(Only for LP-V series)
* For the detail of the model type, refer to "Target laser marker" (P.8).
Data
Description
1 "0"–"7"
1 "0"–"9", "A"–"F"
"35": GS1 DataBar Expanded Stacked
"45": GS1 DataBar Expanded Stacked CC-A
2
"55": GS1 DataBar Expanded Stacked
CC-B
"0": Invalid
1
"2": Valid
"0": Do not invert
1 "1": Invert
"2": Invert with guard pattern
Model type*
LP-V10
7 LP-4x0
LP-4x5/LP-V15
LP-4x1/LP-W
4 "00.0"–"10.0"
2 "02"–"20" Only even value applied
5 "0.050"–"1.000" [mm]
Model type*
8
LP-V10
LP-4x0
LP-4x5/LP-V15
8
LP-4x1/LP-W
7 "-180.00"–"+180.00" [°]
3 "000"–"200" [%]
3 "005"–"500" [%]
(3) "050"–"200" [%]
Setting range [mm]
"001.000"–"090.000"
"001.000"–"110.000"
"001.000"–"160.000"
"001.000"–"055.000"
Setting range [mm]
"-045.000"–"+045.000"
"-055.000"–"+055.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
ME-LP400V-EX-6
Remarks
Specifies which area part is the
marking position of the concatenated
marking on the flying object.
In case of marking static object,
specify "0"
Ratio of separation pattern height to
width.
Number of Symbol Character in
lateral direction.
Set the larger value than "Line width"
in laser setting screen.
Specifies the center coordinate of
the code.
• The correction ratio is calculated
using the value set at the laser
setting as 100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse
Cycle Correction.
103