Installing The Drive Vertically, Frames R6…R9 - ABB ACH580 Series Installation, Operation And Maintenance Manual

14
Installing the drive vertically, frames R6...R9
1. Mark the hole locations for the six mounting holes using the mounting template
included in the package. Do not leave the mounting template under the drive.
The drive dimensions and hole locations are also shown in the drawings in the
ACH580 Hardware manual,
Note: You can use only two bolts instead of four to attach the lower part of the drive.
1
2. Drill the mounting holes.
3. Insert anchors or plugs into the holes and start the bolts into the anchors or plugs.
Use a sufficient number of bolts that are long enough to make them carry the weight
of the drive.
4. Position the drive onto the bolts on the wall. Lift the drive with a lifting device with
another person as it is heavy.
5. Tighten the top two bolts in the wall securely.
2
R6...R9: M8 (5/16 in)
ACH580-01 Installation
c
× 4
IP21,
UL (NEMA)
Type 1
IP55,
UL (NEMA)
Type 12
3
ACH580 Installation, Operation and Maintenance Manual
publication number 3AXD50000044839.
R6 R7
in. mm in. mm
a 22.5 571 24.5 623
b 20.9 531 23.0 583
c 8.4 213 9.7 245
d 11.8 300 11.8 300
e 6.1 155 6.1 155
lb kg lb kg
93.5 42.4 119.1 54.0 152.2 69.0 213.9 97.0
lb kg lb kg
94.8 43.0 123.5 56.0 169.8 77.0 227.1 103.0
M8
4
× 2 × 2
R8 R9
in. mm. in. mm
27.6 701 28.3 718
25.9 658 25.9 658
10.4 263 13.6 345
11.8 300 11.8 300
6.1 155 7.9 200
lb kg lb kg
lb kg lb kg
5