Installation Manual
Quidway Eudemon 200 Firewall
7.5.3 Panel and Interface LED
Table 7-5 1MFX/1SFX panels and LEDs description
Name
1MFX
1SFX
Category
LINK
ACT
7.5.4 Interface Optical Fiber
1MFX should be connected to multi-mode optical fiber and 1SFX to single-mode optical
fiber. The optical interfaces of both cards are SC optical receptacles, so the optical
fibers with SC connector should be selected.
Figure 7-2 Appearance of SC optical fiber connector
Flash state and description
OFF means the link is not connected and ON means the link is connected.
OFF means no data is being transceived on the interface and blinking means data is
being transceived.
Panel figure
7-7
Chapter 7 Interface Module