Mount A Eudemon200 Onto The Workbench; Connect The - Huawei Quidway Eudemon 200 Installation Manual

Installation Manual
Quidway Eudemon 200 Firewall
Fix the equipment to the rack with M3 screw through brackets.
(2)
(1)
1) Mounting screws
3) Guides
Figure 3-3 Install Eudemon200 firewall into a rack

3.2.2 Mount a Eudemon200 onto the Workbench

In most cases, the Eudemon200 firewall is placed on clean bench more often. This
mounting method is simple. Please pay attention to the following items:
Keep the workbench stable and well grounded.
Leave the clearance of 10cm around the Eudemon200 for heat dissipation.
Never put heavy things on the Eudemon200.
3.3 Connect the PGND
Warning:
The normal connection of PGND wire for the Eudemon200 firewall is the essential safeguard against the
lightning shocks and interference. Therefore, you must first correctly connect the PGND wire when
installing and using the Eudemon200.
The Eudemon200 firewall provides a separate PGND screw. You must securely
connect the PGND to the ground, ensuring the faradism and leakage power to be
channeled into the earth ground. Thus, the anti-EMI capability of the entire
Eudemon200 can be significantly improved. The PGND also provides protection
(1) (2)
2) Mounting brackets (carrying cabling racks)
3-3
Chapter 3 Installation
(3)