Huawei Quidway Eudemon 200 Installation Manual page 46

Installation Manual
Quidway Eudemon 200 Firewall
II. Display system information
And then, the following information displays on the screen:
Press Ctrl+B to enter boot menu... 0
If you press <Ctrl+B> within 4 seconds, the system will enter Boot menu. Boot menu
mainly provides application downloading and executing.
If you do not press <Ctrl+B>, the system will take the next step.
Note:
The system provides BootROM master system automatic updating function. Before executing an
application, if it finds the BootROM master system version is different from that recorded in the BootROM
chip, it will automatically update the BootROM master system and reset it. The following information will
display:
Update Bootrom...done!
system will reboot...
III. Select booting device and download applications
If you do not press <Ctrl+B>, the BootROM program will automatically select a booting
device according to the configuration of a user and read the application files from the
corresponding device into SDRAM. If a user configures to boot with Flash, the terminal
screen will yield the following information:
Booting from flash...
The boot file is <flash:/E200.bin>
Updating south bridge logic...done.
*******************************************************
*
* Firewall Platform 8060 Bootrom, Ver 1.08
*
*******************************************************
Copyright(C) 2001-2005 by HUAWEI TECHNOLOGIES CO.,LTD.
Creation date: Nov 10 2003, 13:15:42
CPU type : IBM750FX
CPU L2 Cache : 512KB
CPU Clock Speed : 733MHz
Memory Size : 256MB
Chapter 4 Boot and Configuration
4-6
*
*← BootROM version
*