Rpu - Huawei Quidway Eudemon 200 Installation Manual

Installation Manual
Quidway Eudemon200 Firewall
II. Appearance
Figure 1-3 RPU
III. LED and button
Table 1-2 RPU front panel, LED and button description
Front panel
LED and button
RUN
(green)
ALM
(red)
RESET
10/100
Base-T
X LED
IV. Interface
1) Console interface
System operation LED. Blinking means the CPU is in normal operation, constant ON or

RPU

OFF means the CPU has failed.
FAN FAN operation LED. Constant ON means the FAN is operating normally.
PWR1 PWR1 operation LED. Constant ON means PWR1 is operating normally, and constant
OFF means PWR1 is no in place or has failed.
PWR2 PWR2 operation LED. Constant ON means PWR2 is operating normally, and constant
OFF means PWR2 is no in place or has failed.
RPU System failure LED. ON means CPU has received an alarm signal for PWR or FAN(due to
overheating, for example).
FAN FAN failure LED. ON means the FAN is no in place or its rotation is obstructed.
PWR1 PWR1 failure LED. ON means PWR1 has failed.
PWR2 PWR2 failure LED. ON means PWR2 has failed.
RPU hardware reset button.
LINK
OFF means the link is not connected and ON means the link is connected.
(green)
ACT OFF means no data is being transceived on the interface and blinking means data is
(yellow) being transceived.
Description
1-7
Chapter 1 Overview