Menu: Display - ABB PositionMaster EDP300 Operating Instruction

58 PositionMaster EDP300 DIGITAL POSITIONER | OI/EDP300-EN REV. D
... 9 Operation
... Parameter descriptions

Menu: Display

Menu / parameter Value range
Display
Language English, Deutsch, Français,
Italiano, Español, Português
Engineering Units Temperature
Pressure
Universal input
Display Value Position %
Position °
Setpoint %
Setpoint mA
Deviation %
Temperature
Univ. Inp.
Press. Y1
Press. Y2
Diff. Press.
Supply Press.
Contrast 0 to 100 %
Description
Selects the menu language
Use this parameter to select the units to be displayed.
• Temperature:
°C – degrees Celsius
°F – degrees Fahrenheit
°R – degrees Rankine
K – Kelvin
• Pressure:
psi
bar
kPa
Mpa
• Universal input:
The unit can only be entered in plain text using a DTM / EDD.
Use this parameter to select which value is to be shown on the process display.
• Position % – Position in %
• Position ° – Position in degrees
• Setpoint % – Set point in %
• Setpoint mA – Set point in mA
• Deviation % – Control deviation in %
• Temperature – Device temperature
• Univ. IN – Scaled value at universal input
• Press. Y1 – Pressure output 1
• Press. Y2 – Pressure output 2
• Diff. Press. – Differential pressure between the outputs
• Supply Press. – Supply air pressure
Display contrast