Operation; Safety Instructions; Parameterization Of The Device; Menu Navigation - ABB PositionMaster EDP300 Commissioning Instruction

8

Operation

8.1

Safety instructions

CAUTION
Risk of injury due to incorrect parameter values!
Incorrect parameter values can cause the valve to move
unexpectedly. This can lead to process failures and result in
injuries.
— Before recommissioning a positioner that was previously
in use at another location, always reset the device to its
factory settings.
— Never start Auto Adjust before restoring the factory
settings.
If there is a chance that safe operation is no longer possible,
take the device out of operation and secure it against
unintended startup.
8.2

Parameterization of the device

The LCD display features operating buttons which enable the
device to be operated with the housing cover open.
8.2.1

Menu navigation

1
2
5
Exit
Fig. 27: LCD display
1 Operating buttons for menu navigation
2 Menu name display 3 Menu number display
4 Marking to indicate the relative position within the menu
5 Display of the current function of the buttons
You can use the or
through the menu or select a number or character within a
parameter value.
Different functions can be assigned to the
operating buttons. The function that is currently assigned
is shown on the LCD display.
Operating button functions
Meaning
Exit Exit menu
Back Go back one submenu
Cancel Cancel parameter entry
Select the next position for entering numerical
Next
and alphanumeric values
Meaning
Select Select submenu / parameter
Edit parameter
Edit
OK Save parameter entered
PositionMaster EDP300 | CI/EDP300-EN Rev. C 29
M10145-01
3
Menu
4
5
Select
and
operating buttons to browse
and
5