Description Of The Individual Operating Modes - Siemens SIMATIC S5 Manual

Description of the Individual Operating Modes

The following modes are used by COM247 automatically in the test mode and can be catted by
the PC via FBI 64:
Modes BA 71, BA 73, BA 74: (for monitoring modes, see Section 4.4 "Description of the in-
The following modes can be called indirectly by COM247 by means of function keys and by the
PC via FBl 65:
BA 20- Enter machine data
BA 21- Delete machine data
BA 22- Enter machining program
BA 23- Delete machining program
BA 24- Enter SYSID (module identifier)
BA 64- Read machine data directory
BA 65- Read machining program directory
BA 66- Read actual values (monitoring mode)
BA 67- Read machine data
BA 68- Machine data overview
BA 69- Read machining program
BA 70- Read SYSID (module identifier)
4.2 Description of the Individual Operating Modes
In this description of the modes, it is assumed that you are familiar with the terms "machine
data", "machining program" and "axis attributes". You can read a detailed description of these
terms in Part 2 "Fundamentals of Positioning" in the Sections:
2,5 Machine Data and their Structure,
2.6 Machining Programs and their Structure and
2.7 Axis Attributes.
Note
In the following graphics, the representation has been simplified, so that exponen-
tial functions are represented as ramps,
4 - 6
I