Siemens SIMATIC S5 Manual page 15

Part 6: "Standard Function Blocks FB164and FB165" describes the assignment of para-
meters, operation and monitoring of the IP247 by the CPU. This description dis-
cusses the following:
FBI 64 for operating and monitoring the IP247,
FBI 65 for assigning parameters to the IP247,
the structure of the machine data and machining programs in a STEP 5
block,
examples of parameter assignment for an axis.
Part 7: 'Planning, Installation and Service" cont~ns the following:
notes on planning the drive and the machine data,
guidelines for installing and starting the module,
an overview of troubleshooting routines,
instructions for diagnosing problems.
Part 8; "Index" lists the most important terms
Notes on Using the Manual
used in the handbook.
1-3