Siemens SIMATIC S5 Manual page 14

Notes on Using the Manual
The manual is structured to allow you to become familiar with the system and can later be used
as a reference work to look up specific points.
'Fundamentals of Positioning" introduces terms you require to work with the
Part 2:
positioning module, e.g.:
machine data,
machining programs,
axis attributes,
messages,
By familiarizing yourself with these terms, you will also gain a better understanding
of the functions and concept underlying the IP247,
Part 3: "Hardware" deals with the hardw~e requirements necessary to use the IP247 in a
variety of situations. This covers the following topics:
connections,
jumper settings,
switch settings,
'Functions" introduces you to the operating concept of the IP247. lllis is based
Part 4:
on the following:
operating functions,
monitoring functions,
These functions and their effects are described in this part,
Part !5:
I P247 and how to test it using this software package. The following aspects of
COM247 are covered:
generating machine data and machining programs,
saving the generated data,
storing the data in the memory of the PG,
printing machine data records and machining programs,
testing the IP247 with the plant connected,
1-2
explains how to assign parameters to the