Overview Of The Relationship Between The Mode And The Data Blocks In The Ram Of The Cpu And The Positioning Module 6 - 6 - Siemens SIMATIC S5 Manual

Positioning module 1p 247 for stepper motors

Hide thumbs Also See for SIMATIC S5:

Table of Contents

Overview of the Relationship between the Mode and the Data Blocks in the

RAM of the CPU and the Positioning Module

Machine data and machining programs are stored on the positioning module as data blocks.

The absolute DB and DW numbers refer to the example.

Writing data to the IP247 and deleting data on the IP247

Modes BA: 20 to 24 (=> Part 4 "Functions")

Param. field:

- Z-DB : KF+1O