About this manual
What this chapter contains
This chapter describes the intended audience and contents of the manual. It
contains a flowchart of steps in checking the delivery, installing and commissioning
the drive. The flowchart refers to chapters/sections in the manual and other
manuals.
Intended audience
This manual is intended for people who plan the installation, install, commission, use
and service the drive. Read the manual before working on the drive. The reader is
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
This manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations within the United States that must be
installed per the National Electrical Code and local codes are marked with (US).
Common chapters for several products
Four chapters of this manual,
Motor control and I/O board (RMIO)
products which are listed at the beginning of the chapters.
Categorization according to the frame size
Some instructions, technical data and dimensional drawings which concern only
certain frame sizes are marked with the symbol of the frame size R2, R3... or R8.
The frame size is not marked on the drive designation label. To identify the frame
size of your drive, see the rating tables in chapter
Contents
The chapters of this manual are briefly described below.
Safety instructions
operation and maintenance of the drive.
About this manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Safety
instructions,
and
give safety instructions for the installation, commissioning,
introduces this manual.
Planning the electrical
Resistor braking,
apply to several ACS800
Technical
data.
19
installation,
About this manual