Replacing The Capacitor Pack (R8) - ABB ACS800 Hardware Manual

106

Replacing the capacitor pack (R8)

1. Remove the upper front covers and disconnect the control panel cable. Remove
the side plate equipped with the control panel mounting slot.
2. Disconnect the discharging resistor wires.
3. Undo the fastening screws.
4. Lift the capacitor pack out.
5. Install the new capacitor pack in reverse order to the above.
2 pcs
M6x12 combi screw 3
Maintenance
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
3
4
3
3
3 M6
M10
At the rear side (view from
3
below)
3
3
2
2
2
2 pcs in
690 V
units