Configuring The Chart View - ABB SM1000 User Manual

4.5.2 Configuring the Chart View

Scale Bar
Chart Trace
Time Stamp
Operator Message
Annotation
Alarm Event
Annotation
Major Chart Divisions
Group 1
Level Pressure In Flow
2.08 4 204.9
metres bar l/hr
0
12:00:00
11:59:15
11:58:30
11:57:45
Chart Divisions
Process Group 1
Screen Interval
Minor Chart Divisions
28/03/00
12:00:45
Out Flow Temp Alarm 1
198.9 195 On
l/hr °C
10
12:00:30 High Out Flow Rate
11:58:53 Duty/Standby Switched
11:58:00 High Level
28/03/00
12:00:45
Level
2.08
metres
Pressure
bar
In Flow
204.9
l/hr
Out Flow
198.9
l/hr
Alarm 1
On
Select Horizontal or Vertical Chart view.
Select the annotations to be displayed on the chart. Alarm
events and operator messages are displayed on the chart
adjacent to the point at which the alarm occurred – see
Section 2.3.
This initial setting can be changed by the operator if 'Chart
annotation select enable' is enabled in the Chart view menu
enables – see 'Menu Enables' on the next page.
Set the number of major vertical divisions to be displayed on
the scale bar and the chart.
Set the number of minor vertical divisions to appear between
the major chart divisions on the scale bar.
4 CONFIGURATION...
Screen Interval
4
51