ABB SM1000 User Manual page 15

...2.5 Digital Indicator View
Configuration
Setup
Operator Messages
1 - 6 Start of batch
7 - 12 End of batch
13 - 18 Standby mode active
19 - 24 Cleaning in progress
<user defined> No message
No message
Channel select
Select the Configuration level – see Section 4.
Select the Setup level – see Section 3.
Add one of 24 predefined Operator Messages (see Section 4.4.5) or one User-Defined
Message to the alarm event log. If '<user defined>' is selected, a data entry keyboard
appears to enable the message to be entered – see Fig. 4.6, page 42. The selected or
user-defined message is displayed briefly on-screen.
Hide or display individual channel indicators for the group currently displayed.
Notes.
• The digital indicators displayed are sized equally depending on the number of channels
selected. This has no effect on the recording of the channel.
• Channels that have not been configured are greyed-out in the menu.
28/03/00
Process Group 1
14:52:00
Level In Flow
204.4
26.78
metres
gal/hr
0005402801
m 3
Out Flow Temp
195
198.4
gal/hr
°C
0005402060
3
m
Three or Four
Channels Selected
28/03/00
Process Group 1
14:52:00
In Flow
204.4
gal/hr
0005402801
3
m
Out Flow
198.4
gal/hr
3
m
Two Channels Selected
2 OPERATION...
28/03/00
Process Group 1
14:52:00
In Flow
204.4
gal/hr
3
0005402801 m
One Channel Selected
13